Anode Testing Success at Graphite Bull Project
Released
Released
Announcement PDF
ASX Release
25th January 2024
•
Successful electrochemical work demonstrates suitability of Graphite
Bull feed for Li-ion Battery Anode manufacture
•
Graphite Bull uncoated Purified Spherical Graphite (uPSG) performed
better in anode testing than uPSG from other projects
•
Critical milestone reached after 14 months of work in WA and Germany
•
This very positive result green-lights further development work
Buxton Resources Ltd (‘Buxton’; ASX:BUX) is pleased to update shareholders on
progress at Buxton’s 100% owned Graphite Bull Project, Gascoyne Region, WA.
Graphite industry specialist ProGraphite GmbH in Germany has been managing midand downstream testwork on Graphite Bull concentrate for Buxton since April 2023.
Final results now confirm that the uncoated Purified Spherical Graphite (uPSG) made
from Graphite Bull concentrate is suitable for manufacture of Li-ion battery anodes,
yielding above-average, to good, performance characteristics.
Work involved constructing an anode and Li-ion battery from Graphite Bull uPSG
(see Figure 1). Subsequent electrochemical testwork included multiple charging and
discharge tests to determine electrical capacity and durability characteristics.
ProGraphite concluded the following in a report:
“The results obtained for both samples of uncoated PSG from Buxton are good for
uncoated material: approx. 90% Coulombic efficiency during the 1st cycle…the
graphite can be charged to good capacity levels. Charging to values above 350
mAh/g is considered good for uncoated graphite. The values achieved…were 370
and 369 mAh/g (for S#2634 and S#2635). The performance compared to other
graphite tested is good...almost no degradation…the material is very stable.”
This is a major milestone for Graphite Bull after 14 months of metallurgical work.
Buxton is delighted to keep building on previous project successes including;
•
high-grade concentrate by simple flotation (>98% TGC - ASX 13/3/2023)
•
relative ease of micronizing and spheronising, excellent purification without
the use of any HF acid (99.97% Cg - ASX 7/8/2023)
•
demonstrated Resource upside (ASX 7/2/2023 and 19/4/2023)
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
Buxton’s CEO Marty Moloney said; “Graphite Bull continues to over-deliver at every
turn. Buxton is delighted to have a critical battery mineral project of this calibre in
our portfolio. We also note UBS’s recent comments about the likelihood of a twotier pricing structure for graphite from 2025, suggesting a premium for battery
quality graphite products and recognising coming realities for the global battery
anode industry. Graphite Bull is the right project in the right place, at the right time.”
Buxton thanks ProGraphite for their focus, diligence, and professionalism in this
challenging time of high demand for globally-limited battery anode testing capacity.
Figure 1: Electron photomicrograph of 15 micron uPSG produced from Graphite Bull concentrate, and as used
in anode and battery construction for electrochemical testwork (PSG results reported ASX 7/8/2023)
ProGraphite managed construction of a Li-ion battery (Swagelok® T-Cell) from
Graphite Bull material, and supervised completed assessments as follows;
•
Composition of anode, cathode, electrolyte
•
Test parameters (C-rates) and conditions
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
•
Charging (lithiation) capacity for different C-rates (mAh/g)
•
Discharging (delithiation) capacity for different C-rates (mAh/g)
•
Irreversible capacity (mAh/g)
•
Coulombic efficiency (%)
•
comparison of results with uPSG from other sources
A second bulk concentrate sample is currently being evaluated by Dorfner Anzaplan
GmbH also in Germany, with results expected progressively from May.
Note that these are simplified laboratory tests to confirm general suitability as feed
for battery anode manufacture. To “qualify” for usage by a particular manufacturer,
more tests are usually conducted by the anode producers or battery makers
themselves.
Buxton is taking a measured approach to de-risking Graphite Bull. These excellent
electrochemical test results reaffirm the Li-ion battery space and uPSG production as
a leading option for Graphite Bull concentrate.
Buxton looks forward to providing regular updates to shareholders on this exciting
WA graphite project.
This announcement is authorised by the Board of Buxton Resources Ltd.
For further information, please contact:
Martin Moloney
Chief Executive Officer
marty@buxtonresources.com.au
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
Sam Wright
Company Secretary
sam@buxtonresources.com.au
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
About the Graphite Bull Project
The at-surface, high-grade Graphite Bull (formerly Yalbra) Project is in the Tier 1 jurisdiction of Western Australia,
Gascoyne region, on granted Exploration License E09/1985. Graphite Bull was acquired by Buxton in 2012; by 2014 an
airborne EM survey, several drilling programs and two resource estimates were completed. The Graphite Bull project
currently has a JORC (2012) compliant Inferred Resource of 4 Mt @ 16.2 % TGC (ASX 24/10/2014).
Due to projected growth of the global Lithium-ion battery market, and the essential part graphite will play in that –
graphite is the single largest component of Li-ion batteries – Buxton recommenced work at Graphite Bull in 2022. Work
since then has been focused on metallurgical testwork through to final product (Activated Anode Material), and
increasing Resource confidence and size, with very promising results to date.
Forecast battery-related demand (Benchmark Mineral Intelligence) means that by 2027, global graphite production
needs to double; by 2040, eight times current production will be required to supply the world’s lithium-ion battery
anode market. Non-China battery Anode capacity, and investment, is being spurred by US IRA legislation. Graphite
Bull is therefore a very attractive project, being a high-grade deposit located in a Tier 1, US FTA mining jurisdiction,
with outstanding Resource growth potential.
Figure 2: Location of Buxton’s Graphite Bull Project, 750km north of Perth.
Competent Persons
The information in this report that relates to Exploration Results is based on information compiled by Mr Martin
Moloney, Member of the Australian Institute of Geoscientists and Society of Economic Geologist. Mr Moloney is a fulltime employee of Buxton Resources Ltd. Mr Moloney has sufficient experience which is relevant to the activity being
undertaken to qualify as a “Competent Person” as defined in the 2012 edition of the Joint Ore Reserves Committee
(JORC) Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Moloney
consents to the inclusion in this report of the matters based on the information in the form and context in which it
appears.
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
The information in this document that relates to metallurgical test work managed by ProGraphite GmbH and Battery
Limits Pty Ltd (BL) and is based on, and fairly represents, information and supporting documentation reviewed by Mr
David Pass, BSc (Mineral Science and Chemistry), who is a Member of The Australasian Institute of Mining and
Metallurgy (AusIMM). Mr Pass is a full-time employee of BL, who has been engaged by Buxton Resources Ltd to provide
metallurgical consulting services. Mr Pass has approved and consented to the inclusion in this document of the matters
based on his information in the form and context in which it appears.
Previously Reported Information
There is information in this announcement relating to exploration results previously announced on:
1.
2.
3.
4.
5.
24th October 2014 – Buxton significantly expands Graphite Resource At Yalbra
7th February 2023 – Graphite Bull Exploration Update (Ground EM results)
13th March 2023 – Graphite Bull Update – Metallurgy (Concentrate Grades)
19th April 2023 – Graphite Bull Drilling Assays
7th August 2023 - Graphite Bull - Downstream Processing Success
Validity of Referenced Results
Buxton confirms that it is not aware of any new information or data that materially affects the
information from previous ASX announcements which has been referenced in this announcement.
JORC Table: Section 1 – Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling techniques
Nature and quality of sampling (eg cut channels, random
chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down-hole gamma sondes, or
handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report. In cases where ‘industry
standard’ work has been done this would be relatively
simple (e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other cases,
more explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g.
submarine nodules) may warrant disclosure of detailed
information.
Drill type (e.g., core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc) and
details (e.g. core diameter, triple or standard tube, depth
of diamond tails, face-sampling bit or other type, whether
core is oriented and if so, by what method, etc).
The metallurgical sample was collected from diamond
drillhole YBDD002 and is a composite of PQ and HQ half
core from 20-24m (PQ), 32-57m (HQ) and 112-134m
(HQ) depths.
Method of recording and assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Buxton undertook geotechnical logging at the time of
drilling. The interval weighted average recovery of 93%
Drilling techniques
Drill sample recovery
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
The entire bulk core sample was processed by flotation
to 11.6 kg of >95% TGC concentrate (92% recovery), and
shipped to ProGraphite GmbH in Germany. Micronising,
spheronising and purification was then completed to
produce uncoated purified spheronised graphite
averaging 15 microns in diameter. Multiple electrode
disks 10.95mm in diameter where then produced from
that material for electrochemical testwork.
The metallurgical sample was composited from core
samples recovered from diamond drilling.
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse material.
was recorded for all recovery logged core intervals
within the metallurgical sample.
Logging
Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
All Buxton drill holes are geologically logged by qualified
and experienced geologists, recording relevant data to a
set template to metre intervals. All logging included
lithological features, mineral assemblages,
mineralisation percentages and basic graphite
characteristics, all qualitative by nature.
Sub-sampling
techniques and
sample preparation
If core, whether cut or sawn and whether quarter, half or
all core taken.
If non-core, whether riffled, tube sampled, rotary split,
etc and whether sampled wet or dry.
All material used for the metallurgical sample were
selected from half-core samples of previously sawn
Buxton diamond drill core from 2013-14
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected, including
for instance results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to the grain size of
the material being sampled.
No relationship between sample recovery and grade has
been identified.
These intervals selected for the metallurgical sample
represent a combination of Resource Domains 10, 40
and 50 which contribute 100% of the Inferred tonnes to
the 2014 Resource.
The metallurgical sample was also selected so as to
provide a bulk sample which approximated the average
grade of the Resource. The sample totalled 132.7 kg at
an estimated grade of 15.8% TGC based on assay
intervals of the other half of this cut core (not weighted
by recovery).
ALS Metallurgy subsequently determined the head grade
of this sample to be 16.5% Total Carbon, matching
expectations and the 2014 Resource grade of 4.0 Mt at a
Total Graphitic Carbon grade of 16.2% (see ASX
announcement 24th October 2014).
Based on grade, location, lithologies, oxidation states
and mineralogy the metallurgical sample is considered
representative of the known Resource.
Sample preparation is consistent with industry best
practice and appropriate for the analysis being
undertaken.
See ASX announcement 24 October 2014 for further
information relevant to the historic drilling campaigns.
Quality of assay data
and laboratory tests
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation,
etc.
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
See ASX announcement 7 August 2023 for information
relevant to the laboratory test work undertaken during
bulk sampling, concentrate preparation, and uPSG
production.
See ASX announcement 24 October 2014 for information
relevant to the laboratory test work undertaken during
previous drilling campaigns.
Not applicable for this release.
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory checks)
and whether acceptable levels of accuracy (ie lack of bias)
and precision have been established.
These Results are reported as interim information during
a larger work program still being documented. Two
previous sets of testwork from one sample, managed by
two consultants, running in parallel through two
different metallurgical facilities and two different
analytical facilities, all well-credentialled leading
practitioners in their fields, gives Buxton great
confidence in the quality of work and results, including
for this fourth tranche of testwork.
Battery Limits used ALS Metallurgy, ALS Analytical, and
ProGraphite GmbH in Germany, a well-established
international graphite consultancy.
See ASX announcement 24 October 2014 for information
relevant to the QA procedures undertaken during
previous drilling campaigns.
Verification of
sampling and
assaying
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
See ASX announcement 7 August 2023 for information
relevant to the laboratory test work undertaken during
bulk sampling, concentrate preparation, and uPSG
production.
Not applicable for this release.
Not applicable for this release.
See ASX announcement 24 October 2014 for information
related to the use of twinned holes during the historic
drilling campaigns.
Location of data
points
Documentation of primary data, data entry procedures,
data verification, data storage (physical and electronic)
protocols.
Drillhole data was hand entered to spreadsheets,
imported to a Microsoft Access Database and then
validated by company geologists using GIS and 3D
visualisation software.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes
(collar and down-hole surveys), trenches, mine workings
and other locations used in Mineral Resource estimation.
No adjustments to assay data have been made.
Not applicable for this release. See ASX announcement
24 October 2014 for information relevant to the historic
drilling campaigns.
Specification of the grid system used.
All surface surveying was completed using a handheld
GPS to MGA94 / Zone 50 South grid system.
See ASX announcement 24 October 2014 for information
relevant to the historic drilling campaigns.
Quality and adequacy of topographic control.
Data spacing and
distribution
Orientation of data in
relation to geological
structure
PO Box 661
Nedlands WA 6009
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which
this is known, considering the deposit type.
If the relationship between the drilling orientation and
the orientation of key mineralised structures is considered
to have introduced a sampling bias, this should be
assessed and reported if material.
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
The metallurgical sample was derived from YBDD002,
located towards the eastern end of the 2014 Resource
extent. The metallurgical sample is a composite of the
three Resource Domains (10, 40 & 50) that contributed
to the 2014 Resource.
See ASX announcement 7 August 2023 for information
relevant to the laboratory test work undertaken during
bulk sampling, concentrate preparation, and uPSG
production.
The metallurgical sample represents a composite of
three intervals totalling a 51m intersection through the
known resource that was selected to minimise any
orientation bias that may have been introduced during
drilling.
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
Sample security
Audits or reviews
The measures taken to ensure sample security.
The results of any audits or reviews of sampling
techniques and data.
Graphite Bull drill core has been under Buxton’s
stewardship since drilling in 2014. Core and samples
were packaged and stored in secure storage from the
time of collection through to submission.
Buxton staff collected the composite sample from core
in November 2022 and personally delivered it to ALS
Metallurgy in Balcatta. Best practice methods were
employed by the laboratory upon receipt. The
subsequent concentrate bulk sample (11.6 kg) was
couriered directly by DHL International from ALS
Balcatta, to ProGraphite in Nuernberg, Germany, via
German customs in Leipzig.
CSA conducted a field review of the sampling techniques
and data collection methods in 2014 when the last
drilling campaign was conducted. It was considered by
CSA at that time that Buxton’s sampling techniques and
data acquisition procedures were acceptable for JORC
2014 compliant resource estimation.
JORC Table: Section 2 – Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral tenement and
land tenure status
Type, reference name/number, location and ownership
including agreements or material issues with third parties
such as joint ventures, partnerships, overriding royalties,
native title interests, historical sites, wilderness or
national park and environmental settings.
BUX have a 100% interest in exploration license
E09/1985.
The security of the tenure held at the time of reporting
along with any known impediments to obtaining a licence
to operate in the area.
Acknowledgment and appraisal of exploration by other
parties.
The tenement is in good standing with DMIRS and there
are no known impediments for exploration on this
tenement.
Numerous exploration parties have held portions of the
area covered by BUX tenure previously. The only
substantive historical exploration was by Carpentaria
Exploration Company in the 1970s.
Exploration done by
other parties
A 0.75% Gross Revenue Royalty was granted under a
Tenement Sale Agreement dated 31 March 2016,
between Montezuma Mining Company Ltd
(“Montezuma”) and Buxton Resources Limited. This
royalty is currently held by Electric Royalties Ltd
(TSXV:ELEC & OTCQB:ELECF).
No other parties were involved in the exploration
program that generated data used in this release.
Geology
Deposit type, geological setting and style of
mineralisation.
The Graphite Bull Project area lies within the Errabiddy
Shear Zone, situated at the contact between the
Glenburgh Terrane of the Gascoyne Province and the
Narryer Terrane of the Yilgarn Carton, on the SW margin
of the Capricorn Orogen.
The known graphitic mineralisation occurs as lenses in
graphitic paragneiss assigned to the Quartpot Pelite.
This unit has been interpreted to have been deposited
between 2000 Ma and 1985 Ma in a fore-arc setting to
the Dalgaringa continental margin arc (part of the
Glenburgh Terrain), and subsequently deformed
between 1965–1950 Ma during the Glenburgh Orogeny
within the Errabiddy Shear Zone which represents the
suture between the colliding Pilbara–Glenburgh and
Yilgarn Cratons.
All units at Graphite Bull show evidence for
metamorphism in the amphibolite to granulite facies,
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
T. 08-9380 6063
E. info@buxtonresources.com.au
www.buxtonresources.com.au
with the production of voluminous leucosomes and
leucogranites within the pelitic lithologies
Drill hole Information
A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all Material
drill holes:
o easting and northing of the drill hole collar
Not applicable.
o elevation or RL (Reduced Level – elevation above sea
level in metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
Data aggregation
methods
o hole length
If the exclusion of this information is justified on the basis
that the information is not Material and this exclusion
does not detract from the understanding of the report,
the Competent Person should clearly explain why this is
the case.
In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade truncations
(e.g. cutting of high grades) and cut-off grades are usually
Material and should be stated.
Where aggregate intercepts incorporate short lengths of
high grade results and longer lengths of low grade results,
the procedure used for such aggregation should be stated
and some typical examples of such aggregations should
be shown in detail.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Not applicable. All drillholes results have been previously
reported
Relationship between
mineralisation widths
and intercept lengths
These relationships are particularly important in the
reporting of Exploration Results.
If the geometry of the mineralisation with respect to the
drill hole angle is known, its nature should be reported.
If it is not known and only the down hole lengths are
reported, there should be a clear statement to this effect
(eg ‘down hole length, true width not known’).
All drillholes have been drilled approximately
perpendicular to the strike of the mineralisation.
Diagrams
Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported. These should include,
but not be limited to a plan view of drill hole collar
locations and appropriate sectional views.
Where comprehensive reporting of all Exploration Results
is not practicable, representative reporting of both low
and high grades and/or widths should be practiced to
avoid misleading reporting of Exploration Results.
See text and figures in body of release.
Balanced reporting
Other substantive
exploration data –
Metallurgical testwork
PO Box 661
Nedlands WA 6009
Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or contaminating
substances.
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
T. 08-9380 6063
E. info@buxtonresources.com.au
This document is reporting interim headline results.
Metallurgical data by nature consists of complex
matrices of inter-linked results, the reporting of which
in full would diminish the quality and clarity of
communication. Final results will be reported in more
detail as warranted.
The metallurgical sample was delivered by BUX to ALS
Metallurgy in Perth on 17 Nov 2022. ALS crushed and
blended the sample to 100% passing 3.35 mm,
conducted head assays and prepared splits for
subsequent test work run by two separate consultants
(and partner labs) in Perth in competitive collaboration;
BatteryLimits (ALS) and IMO-Metallurgy (Intertek).
A bulk run of 80kg was then completed by ALS using an
optimised flotation protocol based on previous sighter
work. The resultant 11.6 kg of Flake concentrate was
despatched to ProGraphite in Nuernberg, Germany on
14/04/23, where it was classified, then run through
standardised micronising and spheronising equipment.
www.buxtonresources.com.au
Two industry-standard caustic (NaOH) bake
purifications at 250 deg C and 500 deg C were then
performed on the resulting spheronised graphite.
Electrode preparation - Water-based slurries were
prepared containing 95.8 wt% graphite active material
(uPSG), 1 wt% conductive carbon black Super C65
(Imerys, France), 1 wt% sodium carboxymethyl cellulose
(Sunrose Na-CMC, Nippon Paper Industries Co., Ltd.,
Japan), and 2 wt% styrene-butadiene rubber (SBR,
Nippon Zeon, Japan). Water was added to obtain a solid
content of 51 wt%. The final slurry was then coated
onto a copper foil (11 μm, Gelon LiB Group, China) using
an automatic gap bar coater (RK Print-Coat Instruments,
UK). The coatings were dried at room temperature in
ambient air for 3 h. The areal capacity was 1.7 ± 0.1
mAh cm-2 (based on 372 mAh g-1).
Cell Assembly – Electrode disks were prepared using a
hand-held punch (Nogamigiken, Japan) with a diameter
of 10.95 mm. Electrodes were dried under a dynamic
vacuum at 120 °C overnight. Cells were assembled in a
Swagelok® T-Cell setup with the respective graphite
electrodes as working electrodes, a lithium metal
(Rockwood Inc., USA) counter, and a reference
electrode. Two glass fiber (VWR, USA) separators were
used between the working and counter electrode with
60 μL of electrolyte, being 1 M LiPF6 in ethylene
carbonate and ethyl methylcarbonate(EC:EMC) in a
weight ratio of 30:70 wt% with an additional 2 wt%
vinylene carbonate (VC), abbreviated as LP572
electrolyte (Gotion Inc., China). An additional separator
to the lithium reference was soaked with 30 μL LP572.
Further work
The nature and scale of planned further work (e.g. tests
for lateral extensions or depth extensions or large-scale
step-out drilling).
Diagrams clearly highlighting the areas of possible
extensions, including the main geological interpretations
and future drilling areas, provided this information is not
commercially sensitive.
PO Box 661
Nedlands WA 6009
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
T. 08-9380 6063
E. info@buxtonresources.com.au
Rate performance tests were performed at a battery
cycler (Series 4000, Maccor, USA) in a climate chamber
(Binder, Germany) at 25 °C. The rate test was performed
between 10 mV to 1.5 V vs. Li+/Li.
See text and figures in body of release.
Not applicable.
www.buxtonresources.com.au
Share your feedback
Discover