Metallurgical Results Advance Yalbra Graphite Project
Released
Released
Announcement PDF
9th July 2015
ASX Release
METALLURGICAL RESULTS ADVANCE YALBRA GRAPHITE PROJECT
Metallurgical results show that commercial grades of flake graphite
concentrate @ 91% C(t) can be produced with 30% in the medium and
coarse flake categories
After acid leaching, the combined concentrate was upgraded to 99.5% C(t)
Australia’s highest reported grade graphite resource: 4.0Mt @ 16.2% TGC
(Inferred)
Substantial potential to expand resource along strike and down dip
Buxton is ready to commercialise the Yalbra Graphite Project by bringing
in a strategic partner development and/or offtake
Summary
Buxton Resources Limited (“Buxton” or “the Company”) is pleased to report initial flotation and acid
purification test-work results for its high-grade Yalbra Graphite Project in Western Australia.
Flotation batch test results from a representative fresh rock diamond drill sample grading 20.0% C(t)
returned a concentrate grade of 91% C(t). This concentrate showed a good proportion of medium to
coarse flake material with 30% falling into categories above +149 microns in size (Table 1). The overall
recovery of graphite was 80%, although this should be improved in future locked cycle tests. The process
involved a primary grind, a rougher flotation stage, 2 stages of polishing grind and 5 cleaner flotation
stages.
A final leaching stage using a combined H2SO4/HF solution to upgrade the concentrate was also
completed and showed that a final concentrate grading 99.5% C(t) could be achieved, with the coarser
size fractions grading as high as 99.7% C(t).
Yalbra is Australia’s highest reported grade graphite resource at 4.0Mt @ 16.2% TGC (Inferred) and has
considerable potential to be expanded along strike, and for discovery of additional resources.
The Company is now in a position to begin to commercialise the Yalbra Graphite Project, most likely
through bringing in a strategic partner for development and/or offtake.
Table 1. Flotation and purification results for the Yalbra Graphite Project.
Size
Microns (µm)
Size
Assays
Assays
Distribution
Tyler Mesh
Flotation
Conc.
C (t) %
Purified
Conc.
C (t) %
C (t) %
+297 µm
+48 mesh
91.8
99.7
6.6
+149 µm
+100 mesh
90.6
99.7
22.8
+74 µm
+200 mesh
90.0
99.5
31.2
-74 µm
-200 mesh
91.7
99.1
39.5
90.9
99.5
100.0
Weighted Avg.
PO Box 9028
Subiaco WA 6008
Suite 1, First Floor
14-16 Rowland Street
Subiaco WA 6008
Tel: 08-9380 6063
Fax: 08-9381 4056
www.buxtonresources.com.au
info@buxtonresources.com.au
Commercialisation
Buxton has now shown commercial products can be produced from its very high grade Yalbra Graphite
Project. The resource remains open along strike and there is potential to increase the tonnages
substantially.
The Company is now in a position to seek a development and/or offtake partner to assist in
commercialising the project.
Figure 1. Yalbra Graphite Project tenure position over magnetic image (TMI).
Figure 2. Map of simplified geology with drilling results – Yalbra Main Zone
Figure 3: Photomicrograph of coarsely crystalline graphite with minor mica from graphite-rich layer
YBRC001 80-81m. Reflected light. Field of view is 1200 microns.
Competent Persons
The information in this report that relates to Exploration Results is based on information compiled by Dr Julian Stephens, Member
of the Australian Institute of Geoscientists and Non-Executive Director for Buxton Resources Limited. Dr Stephens has sufficient
experience which is relevant to the activity being undertaken to qualify as a “Competent Person”, as defined in the 2012 edition of
the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves and consents to the inclusion in
this report of the information compiled by him in the form and context in which it appears. All exploration results have previously
been reported in Company ASX announcements under the 2012 JORC code and have not materially changed since initially reported.
The information in this report that relates to in-situ Mineral Resources at the Yalbra Project is based on information compiled by
David Williams of CSA Global Pty Ltd and previously reported on 24/10/2014. David Williams is a Member of the Australasian
Institute of Mining and Metallurgy, and a Member of the Australian Institute of Geoscientists and has sufficient experience, which is
relevant to the style of mineralisation and type of deposit under consideration, and to the activity he has undertaken, to qualify as a
Competent Person in terms of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’
(JORC Code 2012 Edition). David Williams previously consented to the inclusion of such information in the previous report in the
form and context in which it appeared. There have been no material changes to the information reported in the previous report.
Share your feedback
Discover